Victron energy 24/60 User Manual download pdf (Page 3)

1. Safety and regulatory information

General

• Review related documentation of this product to familiarize

yourself with safety markings and instructions before you operate

the equipment.

• This product has been designed and tested in accordance with

international standards. Only use the equipment for the intended

purpose of application.

• WARNING: RISK OF ELECTRIC SHOCK. The product is used in

conjunction with a permanent energy source (battery). Even if the

equipment is switched off, dangerous electrical voltages may

appear at the in- and/or output terminals. Always disconnect AC

power and battery before maintaining or servicing the product.

A Ground Fault Circuit Interrupter (GFCI) must be installed in the

AC supply circuit.

• There are no user-serviceable parts inside. Do not remove the

front plate or operate the product without the front plate fitted.

Refer all servicing to qualified personnel.

• Never use the product in locations where there is danger of gas-

or dust explosions. Consult your supplier to ensure that the

product is intended for use in conjunction with the battery. Always

apply the battery manufacturer’s safety instructions.

• Caution: never carry heavy loads without assistance.

• Explosive gases can be generated during charging of a lead-acid

battery. Prevent open flame and sparks. Take care of sufficient

ventilation during charging.

• Never try to recharge non-rechargeable batteries.

• A double-pole switch with a minimum contact distance of 3mm

must be incorporated in the fixed mains input wiring of the

installation.

1 2 3 4 5 6 7 8 ... 46 47

No comments

Victron energy 24/60 User Manual Page 3